PrepMaster Digital
Log in

CRCST Chapter 8 Quiz (9th Edition): 20 Free Questions

Published 2026-11-12 · Facts and text checked 2026-11-02 · Questions from our CRCST study guide · Reviewed by Hana N., Quality Reviewer

This free quiz has 20 questions on the topics of chapter 8, Cleaning, of the HSPA Sterile Processing Technical Manual, 9th edition: manual and mechanical cleaning, detergents and cleaning verification. They are our own questions, from our CRCST study guide, not taken from the manual. Click an answer to read the explanation.

Our own questions on the topics of chapter 8, Cleaning, of the HSPA Sterile Processing Technical Manual, 9th edition. On the exam this is part of Cleaning, Decontamination and Disinfection. Open each answer to read the explanation.

Question 1Medium

When manually cleaning a hinged instrument like a hemostat, what is the correct position during soaking and rinsing?

Show answer and explanation

Correct answer: D. Fully open to expose all surfaces

Hinged instruments must be fully opened during cleaning to allow detergent and water to reach the hinge area and prevent trapped soil.

From practice test 7 of our CRCST study guide (question 20). Original question, not an official exam item.

Question 2Easy

How often should a cleaning verification test (such as a TOSI or protein residue test) be performed to validate the washer-decontaminator's cleaning effectiveness?

Show answer and explanation

Correct answer: C. At least weekly.

AAMI standards recommend a cleaning verification test at least weekly, with many facilities running daily. Every load is excessive, monthly is too infrequent, and waiting for failure defeats the purpose.

From practice test 6 of our CRCST study guide (question 18). Original question, not an official exam item.

Question 3Easy

Why should cotton gauze not be used to dry instruments after manual cleaning?

Show answer and explanation

Correct answer: B. It sheds fibers that can stick to hinges and lumens.

Cotton gauze sheds fibers that can contaminate instruments and potentially be carried into the surgical site; lint-free cloths are preferred to avoid this.

From practice test 8 of our CRCST study guide (question 91). Original question, not an official exam item.

Question 4Medium

A technician is loading an ultrasonic cleaner with a basket of instruments. To ensure optimal cleaning, the basket should be placed so that it:

Show answer and explanation

Correct answer: D. is suspended in the center, not touching the tank walls or bottom.

If the basket touches the tank walls or bottom, it can dampen cavitation and cause uneven cleaning. The basket should be placed so that instruments are fully immersed and the basket does not contact the tank surfaces.

From practice test 4 of our CRCST study guide (question 87). Original question, not an official exam item.

Question 5Hard

A technician is processing a set of microsurgical instruments. Which of the following is a valid concern about using ultrasonic cleaning for these items?

Show answer and explanation

Correct answer: C. The cavitation energy can cause mechanical damage to delicate tips

Microsurgical instruments are delicate and can be damaged by the cavitation energy of standard ultrasonic cleaning. They often require manual cleaning or low-power cycles.

From practice test 2 of our CRCST study guide (question 20). Original question, not an official exam item.

Question 6Easy

When preparing an ultrasonic cleaner for use, a degassing cycle must be run. What is the typical duration of this cycle?

Show answer and explanation

Correct answer: D. 5-10 minutes

Degassing removes dissolved gases from the cleaning solution that would otherwise dampen cavitation. The standard recommended time is 5 to 10 minutes, after which the solution is ready for use.

From practice test 4 of our CRCST study guide (question 77). Original question, not an official exam item.

Question 7Medium

A central service technician is filling the sink for manual cleaning of surgical instruments. Which water temperature range should be used to prevent protein fixation while ensuring effective cleaning?

Show answer and explanation

Correct answer: B. 80-110°F

The correct manual cleaning water temperature range is 80 to 110°F. Water above 140°F can cause protein fixation, while lower temperatures reduce cleaning effectiveness.

From practice test 6 of our CRCST study guide (question 87). Original question, not an official exam item.

Question 8Easy

The primary mechanism by which an ultrasonic cleaner removes soil from instruments is called:

Show answer and explanation

Correct answer: D. Cavitation.

Cavitation is the formation and violent collapse of microscopic bubbles that dislodge soil from instrument surfaces. Turbulence and hydrolysis are not the primary cleaning mechanisms in ultrasonic cleaners; cavitation is unique to this process.

From practice test 2 of our CRCST study guide (question 62). Original question, not an official exam item.

Question 9Easy

Which of the following parameters are recorded during the mechanical verification of a washer-decontaminator cycle?

Show answer and explanation

Correct answer: B. Time, temperature, and pressure for each phase

Mechanical verification records the time, temperature, and pressure achieved during each phase of the cycle, as these are the critical parameters for ensuring effective cleaning and thermal disinfection.

From practice test 3 of our CRCST study guide (question 123). Original question, not an official exam item.

Question 10Medium

After manually cleaning a rigid endoscope with a lumen, what is the correct method to dry the channel?

Show answer and explanation

Correct answer: C. Pass compressed air through the channel at 20-30 psi

Lumened instruments should be dried by passing compressed air at 20-30 psi through the channel to remove moisture without leaving fibers or residues. Air drying or alcohol flush may not fully dry and can leave residue.

From practice test 4 of our CRCST study guide (question 23). Original question, not an official exam item.

Question 11Medium

Before using an ultrasonic cleaner for instrument cleaning, the solution must be degassed. What is the purpose of this step?

Show answer and explanation

Correct answer: A. To remove dissolved gases that interfere with cavitation.

Dissolved gases dampen the formation and collapse of cavitation bubbles, reducing cleaning effectiveness. Degassing allows maximum cavitation. The step does not affect temperature, concentration, or sterility.

From practice test 2 of our CRCST study guide (question 104). Original question, not an official exam item.

Question 12Medium

To ensure that a chemical indicator in a washer-decontaminator load accurately reflects the conditions throughout the load, where should the indicator be placed?

Show answer and explanation

Correct answer: D. In the most challenging location recommended by the manufacturer.

Placing the indicator in the most challenging location validates that the hardest-to-reach area received proper conditions; other locations may not detect cold spots.

From practice test 8 of our CRCST study guide (question 114). Original question, not an official exam item.

Question 13Hard

After manual cleaning and rinsing, a technician notices white spots on the surface of several instruments. What is the most likely cause?

Show answer and explanation

Correct answer: D. Mineral deposits from tap water used for final rinse

Water spots are typically caused by mineral deposits (e.g., calcium, magnesium) present in tap water that remain after evaporation. Using distilled or deionized water for the final rinse prevents this, as residual detergent would cause a slippery feel, not spots.

From practice test 3 of our CRCST study guide (question 114). Original question, not an official exam item.

Question 14Hard

After a cleaning verification test fails, what should be done before processing the next load?

Show answer and explanation

Correct answer: A. Run a diagnostic or empty cycle with a chemical indicator to verify machine function.

A diagnostic cycle tests whether the machine is functioning correctly before risking another load; simply running another load may repeat the failure.

From practice test 8 of our CRCST study guide (question 123). Original question, not an official exam item.

Question 15Medium

A cleaning verification test in a washer-decontaminator fails, indicating residual soil. What is the appropriate immediate action?

Show answer and explanation

Correct answer: B. Reprocess the entire failed load and test the machine with a diagnostic cycle before running another load

When a cleaning verification test fails, the entire load must be reprocessed because the cleaning was insufficient. The machine must also be tested (e.g., with an empty cycle and indicator) before further use to identify and correct the problem.

From practice test 4 of our CRCST study guide (question 150). Original question, not an official exam item.

Question 16Medium

A cleaning indicator test is run using a TOSI device. After the cycle, the TOSI shows residual soil on the indicator. What does this indicate?

Show answer and explanation

Correct answer: D. The cleaning process was insufficient to remove organic soil from challenging areas

A TOSI is designed to mimic a difficult-to-clean instrument. Residual soil indicates that the cleaning process did not remove all organic matter, meaning the cycle was insufficient.

From practice test 2 of our CRCST study guide (question 148). Original question, not an official exam item.

Question 17Medium

A technician is manually cleaning a set of hemostats. To ensure all surfaces are exposed to detergent and water, the instruments should be:

Show answer and explanation

Correct answer: A. Opened fully at the box lock during the entire soak and rinse

Opening the box lock fully allows detergent and water to reach all surfaces, including the hinge area, preventing soil entrapment. Disassembly is not required for most hinged instruments and may not be possible.

From practice test 8 of our CRCST study guide (question 126). Original question, not an official exam item.

Question 18Medium

To prevent mineral deposits on instruments after manual cleaning, what type of water should be used for the final rinse?

Show answer and explanation

Correct answer: A. Distilled or deionized water

The text states to use distilled or deionized water for the final rinse to prevent mineral deposits from tap water.

From practice test 8 of our CRCST study guide (question 139). Original question, not an official exam item.

Question 19Easy

Water spots appearing on instruments after cleaning are most likely caused by:

Show answer and explanation

Correct answer: A. Mineral deposits from tap water used in the final rinse

Water spots are mineral deposits left behind when tap water evaporates; using distilled or deionized water for the final rinse prevents this.

From practice test 8 of our CRCST study guide (question 9). Original question, not an official exam item.

Question 20Easy

A technician has finished manually cleaning a laparoscopic grasper. What is the correct next step for drying the instrument before it enters the automated washer?

Show answer and explanation

Correct answer: A. Dry with lint-free cloth and use compressed air at 20-30 psi for the lumen.

Lint-free cloth prevents fiber shedding, and compressed air at 20-30 psi effectively removes moisture from lumens, as specified in the text. Cotton gauze sheds fibers, air drying is too slow, and hair dryers are not recommended.

From practice test 6 of our CRCST study guide (question 118). Original question, not an official exam item.

0 of 20 answered. Your result shows each area against our study target.

Want more mixed questions? Go back to the CRCST practice test hub.

Want the full CRCST preparation?

These questions come from our CRCST study guide: full-length practice tests with every answer explained, flashcards, an AI study tutor and the audiobook.