PrepMaster Digital
Log in

CRCST Chapter 22 Quiz (9th Edition): 20 Free Questions

Published 2026-11-16 · Facts and text checked 2026-11-02 · Questions from our CRCST study guide · Reviewed by Hana N., Quality Reviewer

This free quiz has 20 questions on the topics of chapter 22, Safety, of the HSPA Sterile Processing Technical Manual, 9th edition: workplace safety in sterile processing. They are our own questions, from our CRCST study guide, not taken from the manual. Click an answer to read the explanation.

Our own questions on the topics of chapter 22, Safety, of the HSPA Sterile Processing Technical Manual, 9th edition. On the exam this is part of Departmental Considerations. Open each answer to read the explanation.

Question 1Easy

A central service technician sees a diamond-shaped label with a symbol of a liquid pouring out of a test tube onto a hand and a metal surface. Which GHS pictogram does this symbol represent?

Show answer and explanation

Correct answer: A. Corrosion

The GHS pictogram for corrosion depicts a test tube pouring liquid onto a hand and a metal surface. The flame pictogram is for flammability, the exclamation mark for irritants, and the skull and crossbones for acute toxicity.

From practice test 6 of our CRCST study guide (question 130). Original question, not an official exam item.

Question 2Medium

A central service technician is organizing the chemical storage cabinet. On the shelf, there is a bottle of peracetic acid (a peroxide-based sterilant) and a bottle of organic cleaning agent. Another bottle of neutral detergent is also on the same shelf. What is the primary hazard that must be avoided?

Show answer and explanation

Correct answer: B. Storing peracetic acid near an organic cleaning agent can cause a violent reaction producing heat and gas.

Peracetic acid is an oxidizer that reacts violently with organic materials, generating heat and gas. The text explicitly warns against storing peroxide-based sterilants next to organic cleaning agents. The neutral detergent is not an organic reactant in the same hazardous way, so option B is the correct answer.

From practice test 7 of our CRCST study guide (question 75). Original question, not an official exam item.

Question 3Easy

According to OSHA, where must Safety Data Sheets (SDS) be located in the central service department?

Show answer and explanation

Correct answer: D. In a location accessible to all staff during every shift

OSHA requires SDS to be readily accessible to employees during all work shifts, with no barrier to immediate access. Locking them in an office or requiring a password violates this standard.

From practice test 7 of our CRCST study guide (question 123). Original question, not an official exam item.

Question 4Hard

A technician compares two GHS labels: one has the signal word 'Danger' and the other has 'Warning.' Which of the following best describes the meaning of this difference?

Show answer and explanation

Correct answer: B. The 'Warning' labeled chemical poses a lower severity of hazard than the 'Danger' labeled chemical.

Under the GHS system, 'Danger' is used for more severe hazard categories, while 'Warning' is used for less severe categories. The signal word indicates severity, not the specific type of hazard (such as flammability or carcinogenicity), and both labels are part of OSHA's Hazard Communication Standard.

From practice test 6 of our CRCST study guide (question 36). Original question, not an official exam item.

Question 5Hard

An inspection workstation has a fixed counter that is too low for a tall technician. Which adjustment best brings the work surface to the correct ergonomic height?

Show answer and explanation

Correct answer: C. Having the technician stand on a platform to raise their working height

Raising the technician's standing height with a platform aligns the work surface to elbow height. Lowering the chair (A) may cause stooping; placing trays on a riser (B) only addresses one tray; tilting (D) does not fix the height mismatch.

From practice test 5 of our CRCST study guide (question 33). Original question, not an official exam item.

Question 6Medium

A technician notices a diamond-shaped pictogram with a flame symbol on a chemical container. In which section of the SDS would the technician find the written hazard statement that accompanies this pictogram?

Show answer and explanation

Correct answer: D. Section 2 - Hazards Identification

Section 2 of the SDS contains the hazard classification, signal word, GHS pictograms, and hazard statements. The flame pictogram indicates a flammable hazard, and the corresponding hazard statement would be in this section.

From practice test 7 of our CRCST study guide (question 30). Original question, not an official exam item.

Question 7Easy

Which of the following mechanical aids is specifically designed to help lift heavy instrument sets in the sterile processing department?

Show answer and explanation

Correct answer: B. A lift table or vacuum hoist

A lift table or vacuum hoist is the correct mechanical aid for lifting heavy instrument sets. Step stools and rolling carts do not assist lifting, and fatigue mats reduce standing strain, not lifting force.

From practice test 4 of our CRCST study guide (question 95). Original question, not an official exam item.

Question 8Easy

On a storage cabinet, a diamond-shaped label displays a blue square with the number 3. What does the number 3 indicate under the NFPA 704 system?

Show answer and explanation

Correct answer: B. The chemical has a serious health hazard

In the NFPA 704 diamond, the blue quadrant indicates health hazard on a scale of 0 (minimal) to 4 (severe). A rating of 3 means the chemical is capable of causing serious or permanent injury if not handled properly.

From practice test 7 of our CRCST study guide (question 88). Original question, not an official exam item.

Question 9Medium

In the sterile processing department, the workflow proceeds from decontamination to assembly to sterilization. A technician notices fatigue and mild discomfort in the same muscle groups each day. Which intervention most effectively reduces the risk of injury from this repetitive workflow?

Show answer and explanation

Correct answer: B. Taking 20-to-30-second microbreaks every 20 to 30 minutes.

The repetitive nature of the one-way workflow leads to cumulative strain. Microbreaks of 20-30 seconds every 20-30 minutes interrupt the cycle, restoring blood flow and resetting posture, which is the most targeted intervention for repetitive tasks.

From practice test 5 of our CRCST study guide (question 18). Original question, not an official exam item.

Question 10Medium

A technician absorbs a small spill of a neutral detergent with paper towels. The SDS indicates the chemical is non-hazardous. How should the used absorbent be disposed of?

Show answer and explanation

Correct answer: A. Place it in the regular trash.

If the SDS confirms the chemical is non-hazardous, the used absorbent can go into regular trash. Never dispose of chemical absorbent without verifying non-hazardous status.

From practice test 8 of our CRCST study guide (question 72). Original question, not an official exam item.

Question 11Easy

What is the recommended practice for lifting an instrument set that weighs more than 15 pounds?

Show answer and explanation

Correct answer: C. Use a two-person lift or a mechanical assist device.

For heavy sets exceeding 15 pounds, a two-person lift or mechanical assist is standard to prevent back injury.

From practice test 8 of our CRCST study guide (question 63). Original question, not an official exam item.

Question 12Hard

A technician is cleaning up a spill of a chemical cleaner. The SDS for that chemical specifies the type of absorbent material to use. The technician, however, uses a different absorbent that is commonly stocked. What is the most likely consequence of this deviation?

Show answer and explanation

Correct answer: C. The absorbent may be ineffective or may react with the chemical

Section 6 of the SDS specifies the required absorbent material because some chemicals need a neutralizing or compatible absorbent to avoid hazardous reactions or to fully contain the spill. Using a different absorbent can lead to incomplete cleanup or a dangerous reaction.

From practice test 7 of our CRCST study guide (question 137). Original question, not an official exam item.

Question 13Medium

According to spill response protocol, after isolating the spill and reviewing the SDS, what must the technician do before beginning the cleanup?

Show answer and explanation

Correct answer: C. Don the PPE specified in the SDS for that chemical.

Step four is to put on the PPE listed in the SDS, which may include gloves, goggles, and a respirator. The specific PPE is determined by the chemical's SDS.

From practice test 8 of our CRCST study guide (question 74). Original question, not an official exam item.

Question 14Medium

A technician has been using an enzymatic cleaner for months with nitrile gloves. The facility receives a new batch from a different manufacturer. What is the correct action?

Show answer and explanation

Correct answer: D. Consult the SDS for the new product to verify glove compatibility

The SDS is the authoritative source for PPE requirements; different manufacturers may have different formulations requiring different glove materials. Relying on memory or general rules is unsafe.

From practice test 3 of our CRCST study guide (question 40). Original question, not an official exam item.

Question 15Hard

A technician must unload a sterilizer cart where the top shelf is at shoulder height and the items are at the back of the shelf. Which action most effectively reduces the risk of back injury?

Show answer and explanation

Correct answer: C. Use a step stool to raise height so the technician is looking down at the shelf.

Using a step stool brings the technician closer to the load and avoids reaching up or out, reducing forward reach and back strain. This is more effective than a grabber tool which still extends the reach.

From practice test 8 of our CRCST study guide (question 13). Original question, not an official exam item.

Question 16Hard

A technician accidentally splashes a chemical in their eyes. They quickly grab the SDS to find step-by-step first aid instructions. Which section provides the most specific guidance for this situation?

Show answer and explanation

Correct answer: D. Section 4: First Aid Measures

Section 4 of the SDS gives detailed first aid procedures for each route of exposure (eyes, skin, inhalation). Section 2 only identifies hazards, not response actions. Sections 6 and 8 deal with spill control and PPE, not immediate medical care.

From practice test 2 of our CRCST study guide (question 125). Original question, not an official exam item.

Question 17Medium

A technician and a coworker need to lift a 20-pound instrument set from a cart to a shelf. Which technique best prevents back injury?

Show answer and explanation

Correct answer: B. Both stand on opposite sides, lift with legs, and keep back straight.

A two-person lift requires both people on opposite sides to share the load evenly, using leg muscles and keeping the spine straight to protect the lower back. Having both on the same side creates imbalance and increases risk.

From practice test 8 of our CRCST study guide (question 62). Original question, not an official exam item.

Question 18Easy

Which of the following is the primary purpose of a fatigue mat in the decontamination area?

Show answer and explanation

Correct answer: B. To reduce impact on knees and lower back from prolonged standing

Fatigue mats are specifically designed to cushion the body against the cumulative effects of standing on hard surfaces, reducing stress on knees and lower back. Non-slip surfaces address slipping hazards, not fatigue; sitting is not the intent; static control is a separate issue.

From practice test 3 of our CRCST study guide (question 42). Original question, not an official exam item.

Question 19Medium

Why is it recommended to push rather than pull a heavy cart in central service?

Show answer and explanation

Correct answer: C. Pushing uses the larger leg and glute muscles, which are stronger

Pushing engages the larger leg and glute muscles, while pulling recruits smaller back muscles. Therefore, pushing is safer and more efficient.

From practice test 2 of our CRCST study guide (question 9). Original question, not an official exam item.

Question 20Medium

In the decontamination area, a technician uses a spray gun to rinse instruments. Which feature best reduces the risk of hand strain from repeated trigger pulling?

Show answer and explanation

Correct answer: A. A trigger lock that holds the spray on

A trigger lock or larger trigger reduces the sustained finger force needed to keep the spray active, directly addressing repetitive strain. The other options do not reduce the force required to pull the trigger.

From practice test 5 of our CRCST study guide (question 36). Original question, not an official exam item.

0 of 20 answered. Your result shows each area against our study target.

Want more mixed questions? Go back to the CRCST practice test hub.

Want the full CRCST preparation?

These questions come from our CRCST study guide: full-length practice tests with every answer explained, flashcards, an AI study tutor and the audiobook.