PrepMaster Digital
Log in

ACS Organic Substitution Elimination Quiz: 20 Free Questions

Published 2026-11-09 · Facts and text checked 2026-11-02 · Questions from our ACS Organic study guide · Reviewed by Hana N., Quality Reviewer

This free ACS Organic Substitution Elimination Quiz has 20 questions from the practice tests in our ACS Organic study guide, on SN1, SN2, E1 and E2 competition. Click an answer to see if it is right and read the explanation, then check your result against our study target.

ACS organic chemistry: SN1, SN2, E1 and E2 competition. Open each answer to read the explanation.

Question 1Hard

A student claims that replacing chloride with iodide in a secondary alkyl halide will switch the dominant pathway from E2 to SN2 because iodide is a better leaving group. Which evaluation of this claim is correct?

Show answer and explanation

Correct answer: C. It is incorrect because a better leaving group accelerates both E2 and SN2; the competition is controlled mainly by the base and the substrate skeleton.

Leaving group ability affects the rate of both E2 and SN2 in the same direction, so changing from chloride to iodide does not by itself shift the product distribution. The E2 versus SN2 selectivity for a given substrate is governed mainly by the strength and bulk of the base, the solvent, and the temperature.

From practice test 12 of our ACS Organic study guide (question 29). Original question, not an official exam item.

Question 2Medium

Under E2 conditions, replacing sodium ethoxide in ethanol with potassium tert-butoxide in tert-butanol for a secondary alkyl halide often changes the major alkene from the more substituted alkene to the less substituted alkene. Which property of the base causes this change?

Show answer and explanation

Correct answer: D. tert-butoxide is so bulky that it cannot abstract the more hindered internal beta hydrogen, so it removes terminal beta hydrogens instead

The tert-butoxide anion is strongly basic but sterically bulky, so it abstracts the less hindered terminal beta hydrogens rather than the internal beta hydrogen. Sodium ethoxide is smaller, so it can remove the internal beta hydrogen and give the Zaitsev product.

From practice test 4 of our ACS Organic study guide (question 52). Original question, not an official exam item.

Question 3Easy

In an E2 elimination, the hydrogen and the leaving group must be antiperiplanar. What does this requirement determine about the alkene product?

Show answer and explanation

Correct answer: D. The alkene's E or Z geometry is fixed by the stereochemistry of the substrate because only one conformation can undergo anti elimination.

In E2, the leaving group and the beta hydrogen must be antiperiplanar, so the arrangement of the other substituents is fixed during elimination. This makes the reaction stereospecific: each stereoisomer of the substrate gives a specific E or Z alkene.

From practice test 10 of our ACS Organic study guide (question 41). Original question, not an official exam item.

Question 4Hard

Which alkene is the major product when 2-bromo-2-methylbutane is treated with potassium tert-butoxide in tert-butanol?

Show answer and explanation

Correct answer: A. 2-methyl-1-butene (Hofmann product)

Potassium tert-butoxide is bulky, so it abstracts the least hindered beta hydrogen, giving the less substituted Hofmann alkene, 2-methyl-1-butene. The Zaitsev product would dominate with a small base.

From practice test 5 of our ACS Organic study guide (question 23). Original question, not an official exam item.

Question 5Easy

Which stereochemical result is the diagnostic signature of an SN2 mechanism?

Show answer and explanation

Correct answer: B. Complete inversion of configuration

Backside attack forces the nucleophile to approach opposite the leaving group, so the configuration of the reacting carbon is completely inverted. Racemization, not inversion, is the signature of SN1.

From practice test 7 of our ACS Organic study guide (question 39). Original question, not an official exam item.

Question 6Medium

Which choice best explains why iodide ion is a better nucleophile than fluoride ion in water, even though fluoride is the stronger base?

Show answer and explanation

Correct answer: D. Water hydrogen-bonds to the small fluoride ion more strongly, reducing its availability to attack carbon; I- is less strongly solvated and remains more reactive.

Water hydrogen-bonds to small anions, and the effect is much stronger for the compact fluoride ion than for the large iodide ion, so fluoride becomes less effective as a nucleophile. Basicity is affinity for a proton, not for carbon, so a stronger base need not be a stronger nucleophile.

From practice test 9 of our ACS Organic study guide (question 63). Original question, not an official exam item.

Question 7Easy

A tertiary alkyl bromide is stirred in a solvent at room temperature to undergo solvolysis. Which solvent is best suited to this reaction?

Show answer and explanation

Correct answer: D. Aqueous ethanol

Solvolysis proceeds through a carbocation intermediate, so polar protic solvents such as aqueous ethanol stabilize the developing charges and accelerate ionization. DMSO and acetone are polar aprotic solvents that do not hydrogen-bond to the leaving anion, and diethyl ether is nonpolar, so none of them promotes solvolysis as well.

From practice test 12 of our ACS Organic study guide (question 62). Original question, not an official exam item.

Question 8Medium

Which solvent change would most increase the rate of an SN2 reaction between 1-bromobutane and sodium azide?

Show answer and explanation

Correct answer: C. Ethanol to DMSO

Moving from a polar protic solvent (ethanol) to a polar aprotic solvent (DMSO) removes hydrogen bonding that wraps the azide nucleophile, leaving it more reactive. DMF is also polar aprotic, so switching DMSO to DMF would not produce a comparable acceleration.

From practice test 8 of our ACS Organic study guide (question 27). Original question, not an official exam item.

Question 9Easy

In a kinetic study of a substitution reaction, doubling the concentration of the nucleophile doubles the rate, and doubling both the substrate and nucleophile concentrations quadruples the rate. Which mechanism is consistent with this data?

Show answer and explanation

Correct answer: D. SN2

The rate law for SN2 is rate = k[substrate][nucleophile], which predicts that doubling either reactant doubles the rate and doubling both quadruples the rate. None of the other choices has a rate law that includes both substrate and nucleophile concentrations in a bimolecular step.

From practice test 11 of our ACS Organic study guide (question 64). Original question, not an official exam item.

Question 10Easy

A single enantiomer of a tertiary alkyl halide is subjected to solvolysis in aqueous ethanol. If the reaction follows SN1, what stereochemical outcome is expected for the substitution product?

Show answer and explanation

Correct answer: A. Formation of a racemic mixture of enantiomers

The SN1 reaction proceeds through a planar, achiral carbocation intermediate, and the nucleophile attacks from either face with equal probability. The result is a racemic mixture when the starting material is a single enantiomer. Net inversion is the signature of SN2, not SN1.

From practice test 3 of our ACS Organic study guide (question 64). Original question, not an official exam item.

Question 11Medium

Treatment of tert-butyl bromide with a large excess of aqueous ethanol under solvolysis conditions gives which mixture of products?

Show answer and explanation

Correct answer: A. tert-Butyl alcohol and tert-butyl ethyl ether

Ionization of tert-butyl bromide gives a tert-butyl cation that is trapped by water to give tert-butyl alcohol and by ethanol to give tert-butyl ethyl ether. Isobutene is an elimination product, not a substitution product.

From practice test 9 of our ACS Organic study guide (question 39). Original question, not an official exam item.

Question 12Medium

In an SN2 substitution, the nucleophilicity of halide ions changes with solvent choice. Which statement correctly summarizes this solvent effect?

Show answer and explanation

Correct answer: B. In polar aprotic solvents, halide nucleophilicity parallels basicity because the ions are largely unsolvated.

In polar aprotic solvents, halide ions are not hydrogen-bonded, so the smaller, more basic fluoride is the most nucleophilic, making nucleophilicity parallel basicity. In protic solvents this order reverses due to hydrogen bonding.

From practice test 5 of our ACS Organic study guide (question 41). Original question, not an official exam item.

Question 13Hard

For the reaction of a tertiary alkyl halide in a polar protic solvent, how does an increase in temperature affect the competition between SN1 and E1 pathways?

Show answer and explanation

Correct answer: D. The E1 pathway is favored because elimination has a higher activation energy and a positive entropy change.

Higher temperature increases the rate of the reaction with the greater activation energy, which is E1; the positive entropy change for elimination also becomes more favorable at elevated temperatures. As a result, elimination is increasingly favored over substitution as the temperature rises.

From practice test 11 of our ACS Organic study guide (question 61). Original question, not an official exam item.

Question 14Easy

A reaction is proposed to occur by the SN1 mechanism. Which structural feature is required for this mechanistic pathway?

Show answer and explanation

Correct answer: A. A carbocation intermediate that is relatively stable

SN1 proceeds through a carbocation intermediate that forms in the rate-determining ionization step. A relatively stable cation, such as tertiary, benzylic, or allylic, is therefore required.

From practice test 12 of our ACS Organic study guide (question 59). Original question, not an official exam item.

Question 15Hard

For a secondary alkyl halide treated with a strong alkoxide base in a polar protic solvent, both E2 and SN2 can occur. If the leaving group is changed from chloride to bromide, which statement best describes the expected effect on the product distribution?

Show answer and explanation

Correct answer: C. The E2 product becomes a larger fraction of the total product because the better leaving group accelerates elimination more than substitution.

Replacing chloride with bromide lowers the activation energy for both E2 and SN2, but the E2 transition state has a more fully developed leaving-group anion, so the increase in elimination rate is larger. The SN2 product fraction does not become larger because the better leaving group does not selectively favor substitution.

From practice test 7 of our ACS Organic study guide (question 38). Original question, not an official exam item.

Question 16Medium

Which step is required to convert an alcohol into a substrate that can undergo an SN2 reaction?

Show answer and explanation

Correct answer: B. Convert the alcohol to a sulfonate ester or protonate it.

Hydroxide is a poor leaving group, so alcohols must be activated by converting the OH into a better leaving group, such as a sulfonate ester or protonated water. Deprotonation would produce an alkoxide, which is an even worse leaving group.

From practice test 5 of our ACS Organic study guide (question 62). Original question, not an official exam item.

Question 17Easy

In a substitution reaction, doubling the concentration of the nucleophile has no effect on the rate. Which mechanism is most likely?

Show answer and explanation

Correct answer: B. SN1

The SN1 rate law is first order in the substrate because the slow step is ionization of the leaving group, before the nucleophile participates. SN2 would show a concentration dependence on the nucleophile. E1 is an elimination, not a substitution, even though it shares the same unimolecular rate-determining step.

From practice test 6 of our ACS Organic study guide (question 63). Original question, not an official exam item.

Question 18Hard

The E2 reaction of 2-bromo-2-methylbutane with sodium ethoxide in ethanol produces two alkene isomers. Which is the major product according to the Zaitsev rule?

Show answer and explanation

Correct answer: D. 2-Methylbut-2-ene, a trisubstituted alkene

2-Methylbut-2-ene is trisubstituted, while 2-methylbut-1-ene is disubstituted, so the more substituted alkene is the major product by the Zaitsev rule. A small base such as ethoxide favors this rule.

From practice test 9 of our ACS Organic study guide (question 21). Original question, not an official exam item.

Question 19Easy

For a substitution reaction, the rate is found to be first order in the substrate and zero order in the nucleophile. Which mechanism is indicated?

Show answer and explanation

Correct answer: B. SN1

SN1 is unimolecular in the rate-determining step, giving the rate law rate = k[substrate]. The nucleophile concentration is absent from the rate law, so changes in it do not affect the reaction rate.

From practice test 11 of our ACS Organic study guide (question 22). Original question, not an official exam item.

Question 20Easy

In an E2 reaction, what geometric relationship must exist between the beta hydrogen and the leaving group?

Show answer and explanation

Correct answer: A. They must be antiperiplanar, like the 12 and 6 o'clock positions on a clock face.

Antiperiplanar geometry places the C-H and C-leaving group bonds in the same plane, 180 degrees apart, like the 12 and 6 o'clock positions on a clock face. This alignment is required for effective orbital overlap in the E2 transition state.

From practice test 9 of our ACS Organic study guide (question 28). Original question, not an official exam item.

0 of 20 answered. Your result shows each area against our study target.

Want more mixed questions? Go back to the ACS Organic practice test hub.

Want the full ACS Organic preparation?

These questions come from our ACS Organic study guide: full-length practice tests with every answer explained, flashcards, an AI study tutor and the audiobook.