ACS Organic Radical Reactions Quiz: 20 Free Questions
Published 2026-11-12 · Facts and text checked 2026-11-02 · Questions from our ACS Organic study guide · Reviewed by Hana N., Quality Reviewer
This free ACS Organic Radical Reactions Quiz has 20 questions from the practice tests in our ACS Organic study guide, on radical stability and selective halogenation. Click an answer to see if it is right and read the explanation, then check your result against our study target.
ACS organic chemistry: radical stability and selective halogenation. Open each answer to read the explanation.
Question 1Medium
A synthetic sequence requires converting cyclohexene to 3-bromocyclohexene without adding bromine to the double bond. Which reagent and condition accomplishes this?
Show answer and explanation
Correct answer: D. N-Bromosuccinimide (NBS) with light and a trace of HBr
NBS maintains a low concentration of bromine that reacts at the allylic C-H bond through a radical chain, giving allylic bromination. Br2 in CCl4 adds to the double bond rather than substituting at the allylic position.
From practice test 9 of our ACS Organic study guide (question 24). Original question, not an official exam item.
Question 2Hard
A chemist observes that a shipment of styrene containing hydroquinone does not polymerize even after weeks, but after the hydroquinone is removed and a peroxide initiator is added, polymerization proceeds rapidly. Which statement best explains this behavior?
Show answer and explanation
Correct answer: C. Hydroquinone forms a resonance-stabilized radical that stops propagating chains, while the peroxide initiator generates radicals faster than the remaining inhibitor can scavenge.
Hydroquinone acts by donating a hydrogen to a propagating radical to produce a resonance-stabilized phenoxy radical that is too stable to add to styrene, so the chain stops. After the inhibitor is removed, peroxide initiator generates sufficient radicals to outpace any trace of residual inhibitor, allowing polymerization; hydroquinone neither shifts a polymerization equilibrium nor consumes peroxide stoichiometrically.
From practice test 5 of our ACS Organic study guide (question 65). Original question, not an official exam item.
Question 3Easy
In radical chlorination of methane, a single photon generates one chlorine atom that leads to formation of many chloromethane molecules. Which property of the mechanism explains this high product yield per initiation event?
Show answer and explanation
Correct answer: D. Each propagation cycle regenerates a chlorine radical while converting an alkane into an alkyl chloride.
A single initiation event starts a chain in which propagation regenerates the chlorine radical each cycle, so one radical can cause thousands of product-forming cycles. Termination removes radicals only occasionally, so the yield per photon is high.
From practice test 9 of our ACS Organic study guide (question 40). Original question, not an official exam item.
Question 4Hard
Which product is formed predominantly when 4-ethyltoluene (1-ethyl-4-methylbenzene) is treated with one equivalent of NBS under light?
Show answer and explanation
Correct answer: B. 1-(1-bromoethyl)-4-methylbenzene (bromination at the benzylic carbon of the ethyl group)
NBS selectively brominates benzylic C-H bonds, not aromatic ring positions. The secondary benzylic radical formed at the ethyl alpha carbon is more stable than the primary benzylic radical from the methyl group, so the ethyl-side-chain bromide is the major product.
From practice test 6 of our ACS Organic study guide (question 12). Original question, not an official exam item.
Question 5Easy
Which elementary step is a termination step in a radical chain reaction?
Show answer and explanation
Correct answer: B. Br• + CH3• -> CH3Br
Termination combines two radicals to form a neutral molecule, removing chain carriers. Hydrogen abstraction is propagation, reaction with a halogen molecule is propagation, and breaking Br2 is initiation.
From practice test 2 of our ACS Organic study guide (question 14). Original question, not an official exam item.
Question 6Medium
Chlorination of 2-methylbutane gives a relatively unselective mixture of products despite the greater stability of the tertiary radical. Which statement best explains this observation using the Hammond postulate?
Show answer and explanation
Correct answer: A. Chlorine radical is so highly reactive that its transition state resembles reactants, so the small differences in C-H bond environment are barely felt.
Chlorine radical is so reactive that its transition state resembles the early, reactant-like portion of the surface. All C-H bonds look similar there, so the small radical stability difference has little effect on rate.
From practice test 11 of our ACS Organic study guide (question 47). Original question, not an official exam item.
Question 7Easy
What is the major organic product of the reaction of propene with NBS under light?
Show answer and explanation
Correct answer: C. 3-bromoprop-1-ene
NBS brominates the allylic position, which is C3 in propene, giving 3-bromoprop-1-ene, also called allyl bromide. The other options are saturated bromides or vinylic bromides, not the allylic substitution product.
From practice test 6 of our ACS Organic study guide (question 40). Original question, not an official exam item.
Question 8Medium
Propene is treated with N-bromosuccinimide (NBS) and light. What is the major organic product formed?
Show answer and explanation
Correct answer: C. 3-bromoprop-1-ene
NBS bromination of propene abstracts a hydrogen from the allylic carbon (C3), giving a resonance-stabilized allylic radical, and bromine is transferred to that carbon to form 3-bromoprop-1-ene. The double bond is retained; 1-bromopropane and 2-bromopropane would be addition products, not allylic substitution products.
From practice test 12 of our ACS Organic study guide (question 3). Original question, not an official exam item.
Question 9Hard
Radical bromination of propane produces 2-bromopropane and 1-bromopropane. Which statement correctly gives the predicted product ratio and explains why it differs so sharply from chlorination?
Show answer and explanation
Correct answer: C. The ratio is about 27:1 (2-bromopropane to 1-bromopropane) because the bromine radical is less reactive, so its transition state resembles the more stable secondary radical.
Bromination gives 160 parts 2-bromopropane from two secondary hydrogens at rate 80 and 6 parts 1-bromopropane from six primary hydrogens at rate 1, a ratio of 160:6 (about 27:1). The selectivity arises because the less reactive bromine radical has a late transition state that resembles the more stable secondary radical.
From practice test 3 of our ACS Organic study guide (question 63). Original question, not an official exam item.
Question 10Hard
Diethyl ether stored in air slowly develops explosive organic peroxides. Which sequence correctly describes the radical chain pathway by which these peroxides form?
Show answer and explanation
Correct answer: A. A radical removes an alpha hydrogen to give a carbon radical; this radical adds O2 to form a peroxy radical; the peroxy radical abstracts a hydrogen from another ether molecule, forming a hydroperoxide and a new alpha carbon radical.
The autoxidation of ethers is a radical chain process: a radical removes an alpha hydrogen, O2 adds to the carbon radical to give a peroxy radical, and the peroxy radical abstracts a hydrogen from another ether molecule. This yields a hydroperoxide and regenerates the chain-carrying alkyl radical.
From practice test 11 of our ACS Organic study guide (question 34). Original question, not an official exam item.
Question 11Medium
A student sets up an allylic bromination of cyclohexene using NBS but keeps the flask in the dark and does not add a peroxide initiator. What is the most reasonable outcome?
Show answer and explanation
Correct answer: C. No radical chain begins, so bromination does not occur.
Light or peroxide is needed to initiate homolysis and generate bromine radicals from the small amount of Br2. In the dark without an initiator, no radicals are produced and allylic bromination cannot occur.
From practice test 6 of our ACS Organic study guide (question 52). Original question, not an official exam item.
Question 12Easy
In a simple alkyl radical such as the methyl radical, the carbon atom bearing the unpaired electron has which geometry?
Show answer and explanation
Correct answer: C. Trigonal planar
The radical carbon is sp2 hybridized, with three sigma bonds and one singly occupied p orbital, so the three substituents adopt a trigonal planar arrangement with bond angles near 120 degrees. A tetrahedral geometry would require an additional bonding pair on carbon, which is not present in a neutral carbon radical.
From practice test 10 of our ACS Organic study guide (question 18). Original question, not an official exam item.
Question 13Medium
In the allylic bromination of cyclohexene, chemists commonly use N-bromosuccinimide (NBS) instead of bromine itself. What is the key reason for this choice?
Show answer and explanation
Correct answer: A. NBS maintains a low, steady concentration of Br2 so substitution at the allylic position outcompetes ionic addition.
NBS reacts slowly with HBr liberated during the reaction, keeping the Br2 concentration low. The low Br2 concentration allows the radical chain substitution at the allylic position to outcompete electrophilic addition to the alkene, which is why the allylic bromide is formed rather than the dibromide.
From practice test 12 of our ACS Organic study guide (question 34). Original question, not an official exam item.
Question 14Hard
Why does chlorination of 2-methylbutane give a nearly statistical mixture of monochlorinated products, whereas bromination gives predominantly 2-bromo-2-methylbutane?
Show answer and explanation
Correct answer: C. Chlorine radical is so reactive that its abstraction transition state is early and product-radical stability has little effect on the rate.
Chlorine radical is so reactive that its transition state lies early along the reaction coordinate and resembles the reactants, so all C-H bonds appear similar. The less reactive bromine radical has a late transition state resembling the product radical, so tertiary C-H abstraction is strongly favored.
From practice test 7 of our ACS Organic study guide (question 5). Original question, not an official exam item.
Question 15Medium
A chemist proposes elementary steps for the monochlorination of ethane. Which step correctly represents the second propagation step in the chain mechanism?
Show answer and explanation
Correct answer: B. CH3CH2• + Cl2 -> CH3CH2Cl + Cl•
The preceding propagation step is hydrogen abstraction by a chlorine atom, and radical recombination is a termination step.
From practice test 8 of our ACS Organic study guide (question 52). Original question, not an official exam item.
Question 16Medium
Monochlorination of propane gives a mixture of 1-chloropropane and 2-chloropropane in roughly a 4:3 ratio, whereas monobromination gives 2-bromopropane almost exclusively. What explains this difference in selectivity?
Show answer and explanation
Correct answer: C. Bromine radicals are less reactive and form a later transition state that reflects the stability difference between secondary and primary radicals.
Bromine radical abstracts hydrogen much more slowly than chlorine radical, so its transition state comes later and resembles the alkyl radical product, causing the full stability advantage of the secondary radical to be felt. Chlorine's highly reactive radical has an early, reactant-like transition state and therefore shows little discrimination.
From practice test 8 of our ACS Organic study guide (question 37). Original question, not an official exam item.
Question 17Medium
Radical chlorination of propane produces 1-chloropropane and 2-chloropropane. With relative abstraction rates of 1 for primary and 4 for secondary hydrogens, what is the predicted ratio of 1-chloropropane to 2-chloropropane?
Show answer and explanation
Correct answer: C. 3 : 4
Propane has six primary and two secondary hydrogens, so the ratio is 6 × 1 : 2 × 4 = 6:8, which simplifies to 3:4 for 1-chloropropane to 2-chloropropane. The per-hydrogen rate ratio 1:4 is the common error when hydrogen counts are ignored.
From practice test 3 of our ACS Organic study guide (question 59). Original question, not an official exam item.
Question 18Medium
Treatment of 1-butene with NBS and light gives a mixture of two monobrominated allylic products. Which compound is the major product?
Show answer and explanation
Correct answer: B. 1-bromo-2-butene
The allylic radical from 1-butene is delocalized, and attack at the terminal end gives 1-bromo-2-butene, a more substituted internal alkene. The minor product is 3-bromo-1-butene because it has a less substituted terminal alkene.
From practice test 6 of our ACS Organic study guide (question 69). Original question, not an official exam item.
Question 19Easy
In the UV-initiated chlorination of methane, which step is classified as initiation?
Show answer and explanation
Correct answer: A. Cl2 -> 2 Cl•
Initiation is the homolytic cleavage of the halogen-halogen bond to generate two radicals. The other listed steps are propagation steps or a termination step.
From practice test 7 of our ACS Organic study guide (question 46). Original question, not an official exam item.
Question 20Hard
A sample of cyclohexane and bromine in the dark at room temperature shows no reaction. After brief exposure to visible light, the reaction begins and continues for a while even after the light source is removed. Which conclusion is best supported by these observations?
Show answer and explanation
Correct answer: B. The light initiates Br-Br homolysis, and the chain propagation steps continue until radicals are removed by termination.
Radical halogenation needs energy only for initiation, the homolytic cleavage of the halogen-halogen bond. Once bromine radicals form, the propagation steps are exothermic and continue until termination removes the chain carriers, so the reaction does not stop immediately when light is removed.
From practice test 8 of our ACS Organic study guide (question 15). Original question, not an official exam item.
0 of 20 answered. Your result shows each area against our study target.
Want more mixed questions? Go back to the ACS Organic practice test hub.
Want the full ACS Organic preparation?
These questions come from our ACS Organic study guide: full-length practice tests with every answer explained, flashcards, an AI study tutor and the audiobook.